基于PMU的电力系统监控体系结构优化设计

文中提出了一种利用有限数量的相量测量单元(PMU)和相量数据集中器(PDC)设计最优监控结构的方法。通过在大量的设定值场景下,使电力系统可观测性曲线的期望值最大化,同时使通信基础设施成本最小化,最终确定PMU和PDC的最佳位置。提出了一种非线性动态扩展卡尔曼滤波(EFK)状态观测器。这种状态观测器可以将暂态行为转换为由代数微分方程描述的广域电力系统,而无需非线性反演技术。最后以IEEE-5电力系统为例,说明了该方法的有效性。     

基于ADAMS和MATLAB的双足机器人运动轨迹规划和控制的联合仿真

相比ADAMS仿真的不稳定性,利用ADAMS和MATLAB联合仿真对双足机器人运动轨迹规划和控制设计的可靠性及高效性进行了研究。首先绘制双足机器人三维参数模型进行逆运动学分析,验证其合理性后导入ADAMS中添加约束,进行动力学仿真。基于此,在MATLAB中使用多项式插值法完成模型的步态规划。最后利用Simulink试验台建立控制系统的框图,由ADAMS输入关节角之后控制台输出关节的驱动力矩,完成双足机器人ADAMS和MATLAB的联合仿真。仿真结果显示,联合仿真相较于ADAMS仿真的波动性所获得的数据更加稳定,此法高效可行,可作为下一步设计双足机器人的控制系统电机选型的重要理论依据。     

爆破位置对深凹露天矿山炮烟扩散的影响研究

深凹露天矿山由于其特殊的结构,爆破产生的炮烟扩散稀释较为困难,严重危害生产作业人员的生命安全与健康。基于实际矿山构建了深凹露天矿山的二维物理及数学模型,采用非稳态数值分析方法研究了不同爆破位置下,深凹露天矿山采坑内爆破炮烟的扩散规律。研究结果表明：不同爆破位置下,露天采坑内均出现复环流,爆破点位置是影响露天采坑内风流结构特征的重要因素；露天采坑内的炮烟最高浓度均随着时间变化而逐渐下降,但下降的速率逐步减小,呈现三个阶段的下降趋势；爆破位置位于背风侧时露天采坑内的炮烟最高浓度和降至安全浓度所需时间远高于迎风侧三个爆破位置；随着背风侧爆破点距采坑底部距离的减小,炮烟最高浓度及降至安全浓度所需时间先降低后增加,炮烟最高浓度及降至安全浓度所需时间随着迎风侧爆破位置距采坑底部距离的减小而增加。研究结果对于指导深凹露天矿山企业合理组织爆破后的生产作业和保障作业人员安全具有重要意义。     

立柱加固型框架大楼的爆破拆除

采用定向控制爆破技术拆除立柱加固型7层框架大楼。为了彻底炸毁加固立柱,确保大楼顺利定向倾倒,通过多次爆破试验确定了炸药单耗、布孔参数和装药结构。为了控制大楼塌落时的触地震动,采取了秒差分区爆破、空中解体、铺垫缓冲层和开挖减震沟等技术措施。爆破过程中进行了震动监测。此外还介绍了起爆顺序、安全防护措施及爆破结果。     

Numerical study on laminar burning velocity of ammonia flame with methanol addition

The combustion characteristics of ammonia/methanol mixtures were investigated numerically in this study. Methanol has a dramatic promotive effect on the laminar burning velocity (LBV) of ammonia. Three mechanisms from literature and another four self-developed mechanisms constructed in this study were evaluated using the measured laminar burning velocities of ammonia/methanol mixtures from Wang et al. (Combust.Flame. 2021). Generally, none of the selected mechanisms can precisely predict the measured laminar burning velocities at all conditions. Aiming to develop a simplified and reliable mechanism for ammonia/methanol mixtures, the constructed mechanism utilized NUI Galway mechanism (Combust.Flame. 2016) as methanol sub-mechanism and the Otomo mechanism (Int. J. Hydrogen. Energy. 2018) as ammonia sub-mechanism was optimized and reduced. The reduced mechanism entitled ‘DNO-NH3’, can accurately reproduce the measured laminar burning velocities of ammonia/methanol mixtures under all conditions. A reaction path analysis of the ammonia/methanol mixtures based on the DNO-NH3 mechanism shows that methanol is not directly involved in ammonia oxidation, instead, the produced methyl radicals from methanol oxidization contribute to the dehydrogenation of ammonia. Besides, NO_x emission analysis demonstrates that 60% methanol addition results in the highest NO_x emissions. The most important reactions dominating the NO_x consumption and production are identified in this study.     

A thermodynamic equilibrium analysis of hydrogen and synthesis gas production from steam reforming of acetic acid and acetone blends as bio-oil model compounds

Thermodynamic analysis of steam reforming of blends of two model oxygenates, acetic acid and acetone, representing carboxylic acids and ketones in bio-oil is performed to investigate the effects of their potential interactions on hydrogen yield, synthesis gas composition and progress of reaction network. The results show that both acetic acid and acetone reach complete conversion at all operating conditions. Higher S/C molar ratio results in higher H₂ and CO₂ yields for both acetic acid and acetone. With the increase in pressure, H₂ and CO yields are diminished whereas CH₄ and CO₂ yields are enhanced. H₂ and CO₂ yields increase with the decrease in acetone concentration in the feed blend. CO and CH₄ production are affected adversely for acetic acid rich blends. The maximum H₂ yield values are 75.54%, 78.34%, 80.09%, 81.78% and 84.17% at 700 °C for acetic acid/acetone blends of 0.0/1.0, 0.3/0.7, 0.5/0.5, 0.7/0.3 and 1.0/0.0, respectively.     

Farmers' preferences for adopting on-farm concentration of raw milk: Results from a discrete choice experiment in Germany

Milk concentrates are used in the manufacturing of dairy products such as yogurt and cheese or are processed into milk powder. Processes for the nonthermal separation of water and valuable milk ingredients are becoming increasingly widespread at farm level. The technical barriers to using farm-manufactured milk concentrate in dairies are minimal, hence the suspicion that the practice of on-farm raw milk concentration is still fairly uncommon for economic reasons. This study, therefore, set out to investigate farmers' potential willingness to adopt a raw milk concentration plant. The empirical analysis was based on discrete choice experiments with 75 German dairy farmers to identify preferences and the possible adoption of on-farm raw milk concentration. The results showed that, in particular, farmers who deemed the current milk price to be insufficient viewed on-farm concentration using membrane technology as an option for diversifying their milk sales. We found no indication that adoption would be impeded by a lack of trustworthy information on milk processing technologies or capital.     

Tri-reformer with O2 side-stream distribution for syngas production

Methane tri-reforming combines steam reforming, dry reforming and partial oxidation of methane in a single reactor. The heat generated by the exothermic partial oxidation of methane can be used to supply the energy for the other two endothermic reactions (dry and steam reforming of methane). The thermoneutral condition allows the use of a tri-reformer with a simpler reactor structure since no external heat supply is necessary. Thermodynamic analysis of the thermoneutral reactor was performed using Gibbs free energy minimization approach. Conventional tri-reformers have heat and mass management problems. We developed a novel tri-reformer concept that utilizes proper distribution of O₂ gas to the reactor to address the problems. The optimization of the proposed reactor was performed with the objective function of minimizing total annual cost. Maintaining the peak temperatures by adjusting the O₂ flow rate at the distribution point along the reactor was shown to provide good load flexibility for the change in methane flow rate.     

火电机组一次调频性能实时监测系统

为了实时监测和评价火电机组一次调频性能，开发了火电机组一次调频性能实测监测系统。该系统具有一次调频参数异动感知、一次调频性能量化预测及自适应校正等关键功能。某机组的实际应用表明，该系统能够实现火电机组一次调频关键参数的实时监测和调频性能的准确预测。